Powerheads
Fawcett powerhead assemblies contain all the necessary working components for a mixer. An air motor, a speed control valve, an exhaust muffler, an output coupling/chuck, and one of our mounting interfaces. Fawcetts high performing, pneumatic air motors deliver critical operation for explosion-proof environments. Requires minimal maintenance and cannot be damaged by overloading.
Model suffix denotes attachment.
A: Keyed Chuck, B: Coupling, C: Keyless Chuck
| MODEL | HP | MAX RPM | MAX CFM | AIR INLET | OUTPUT |
|---|---|---|---|---|---|
| LS-101A | 0.5 | 10,000 | 21 | 1⁄8 NPT | Up to 3/8" |
| LS-101B | 0.5 | 10,000 | 21 | 1⁄8 NPT | Up to 3/8" |
| LS-102A | 1.0 | 3,000 | 30 | 1/4 NPT | Up to 1/2" |
| LS-102B | 1.0 | 3,000 | 30 | 1/4 NPT | Up to 1/2" |
| LS-102C | 1.0 | 3,000 | 30 | 1/4 NPT | - |
| LS-103A | 1.7 | 3,000 | 72 | 1/4 NPT | Up to 1/2" |
| LS-103B | 1.7 | 3,000 | 72 | 1/4 NPT | Up to 1/2" |
| LS-103C | 1.7 | 3,000 | 72 | 1/4 NPT | - |
| LS-104A | 4.0 | 3,000 | 128 | 1/2 NPT | Up to 1/2" |
| LS-104B | 4.0 | 3,000 | 128 | 1/2 NPT | Up to 5/8" |
| LS-105B | 5.0 | 2,500 | 128 | 1/2 NPT | Up to 3/4" |
Mufflers
Reduces excessive exhaust noise. Improves motor performance. Helps meet important safety standards.
| MODEL | SIZE | DESCRIPTION |
|---|---|---|
| M-02 | 1/4 NPT | Exhaust Air Muffler with 1/4 NPT Male thread; Includes Brass Adapter |
| M-07 | 1/2 NPT | Exhaust Air Muffler with 3/4 NPT Male thread; Includes Female Reducing Fitting for Motor Attachment [3/4 NPT x 1/2 NPT] |
Tachometer
Tachometers are factory installed upgrades available on new equipment. Retrofit service is also available for used motors in good condition. Inquire with us for retrofits. Kit includes: Tachometer, Motor End Cap replacement, Internal Shaft Adapter.
+/- 1% accuracy (of max indicated speed). Safe for explosion proof environment with internal grounding.
| MODEL | DESCRIPTION | Motor Capacity |
|---|---|---|
| TK-2/3 | Tachometer Upgrade Kit | 20A, 30A |
| TK-4 | Tachometer Upgrade Kit for 104 Motor | 40A |
Chucks
Mounts on specific motor shaft with set screw.
| Item No | DESCRIPTION |
|---|---|
| 01J | Keyed Chuck; 3/8" Capacity; Mounts to 3/8" Dia. Motor Output Shaft; *Uses CK-3/8 Chuck Key* |
| 03J | Keyed Chuck; 1/2" Capacity; Mounts to 1/2" Dia. Motor Output Shaft; *Uses CK-1/2 Chuck Key* |
| 04J | Keyed Chuck; 1/2" Capacity; Mounts to 5/8" Dia. Motor Output Shaft; *Uses CK-1/2 Chuck Key* |
| CK-1/2 | Key for 03J [1/2" Capacity] Chuck |
| CK-3/8 | Key for 01J [3/8" Capacity] Chuck |
Keyless Chucks Available
Couplings
Used when attaching shafts to motors or gearboxes. Comes with set screws and hex key wrench.
| MODEL | SIZE | DESCRIPTION |
|---|---|---|
| 01S | 5⁄16 ” | Brass Sleeve Coupling |
| 03S | 1/2” | Stainless Steel Sleeve Coupling |
| 04S | 5⁄8” | Stainless Steel Sleeve Coupling |
| 05S | 3/4” | Stainless Steel Sleeve Coupling |
Step Couplings are available upon request.
Valves
We use high quality brass valves.
| MODEL | SIZE | DESCRIPTION |
|---|---|---|
| 01V | 1⁄8 NPT | Brass Needle Valve, MxF |
| 02V | 1/4 NPT | Brass Needle Valve, FxF (w/ brass close nipple) |
| 03V | 1/4 NPT | Gate Valve |
| 04/05V | 1/4 NPT | Brass Ball Valve, FxF (w/ galvanized 3” nipple) |
Rod Mounts
These mounts attach to our air motors and combined with the proper Fawcett clamp block comprise a simple and effective mounting system for stands and portable clamp mixers.
| MODEL | POWERHEAD | DESCRIPTION |
|---|---|---|
| 01V | 101 | Rod Mount Assembly: 1/2” Rod Dia; Fits 10A-HUB Motor; Zinc Plated; (w/ set screw) |
| 02/03R | 102 | Rod Mount Assembly; 1/2” Rod Dia; Fits 20A-HUB & 30A- HUB motor; Zinc Plated; (w/ fasteners) |
| 04R | 104 | Rod Mount Assembly; 3/4” Rod Dia; Fits 40A-Foot Motor; Zinc Plated (w/Fasteners) |
| 05R | 105 | Rod Mount Assembly: 3/4” Rod Dia; Fits 50A-FOOT Motor; Zinc Plated; (w/ fasteners) |
Clamp Blocks
Attaches motor rod mount to support stands or clamps. (Two zinc plated T-Handles included)
| MODEL | SIZE | DESCRIPTION |
|---|---|---|
| L-1 | 1/2” x 1/2” Bore | Basic Clamp Block Assembly, Zinc Plated (includes two T-Handles) |
| L-1P | 1/2” x 5⁄8” Bore | Basic Clamp Block Assembly, Zinc Plated (includes two T-Handles) |
| L-2 | 5⁄8” x 5⁄8” Bore | Basic Clamp Block Assembly, Zinc Plated (includes two T-Handles) |
| L-3P | 3/4” x 1/2” Bore | Basic Clamp Block Assembly, Zinc Plated (includes two T-Handles) |
| L-4 | 5⁄8” x 3/4” Bore | Basic Clamp Block Assembly, Zinc Plated (includes two T-Handles) |
| L-6 | 3/4” x 3/4” Bore | Basic Clamp Block Assembly, Zinc Plated (includes two T-Handles) |
| L-8 | 3/4" x 3/4" Bore | Basic Clamp Block Assembly, Zinc Plated |
| TH-1 | - | T Handle for Basic Block Clamp, Zinc Plated |
Lab Stands
All plates are heavy duty, zinc plated steel for corrosion resistance.
| MODEL | DESCRIPTION |
|---|---|
| AX-1 | Lab Stand; 8"W x 10"D for vessels up to 8" Dia.; Includes 24" Tall x 1/2" Dia. Support Rod; Zinc Plated |
| AX-23 | Lab Stand; 14"W x 16"D for vessels up to 14" Dia.; Includes 34" Tall x 3/4" Dia. Support Rod; Zinc Plated |
| AX-25 | Lab Stand; 14"W x 16"D for vessels up to 14" Dia.; Includes 48" Tall x 3/4" Dia. Support Rod; Zinc Plated |
| AX-1R | Lab Stand Vertical Support Rod; 24" Tall x 1/2" Dia.; Stainless Steel; w/ Jam Nut |
| AX-23R | Lab Stand Vertical Support Rod; 34" Tall x 3/4" Dia.; Zinc Plate; w/ Jam Nut |
| AX-25R | Lab Stand Vertical Support Rod; 48" Tall x 3/4" Dia.; Zinc Plate; w/ Jam Nut |
Bare Motors
Standard “Bare” replacement air motors. Does NOT include any mounting hardware, valve, muffler, or other accessories.
| MODEL | DESCRIPTION |
|---|---|
| 10A-HUB | 0.5 HP Air Motor; Hub Mount |
| 20A-HUB |
1.0 HP Air Motor; Hub Mount |
| 30A-HUB |
1.7 HP Air Motor; Hub Mount |
| 30A-NEMA | 1.7 HP Air Motor; 56C NEMA Flange Mount |
| 40A-FACE | 4.0 HP Air Motor; Face Mount |
| 40A-FOOT | 4.0 HP Air Motor; Foot Mount [300-3000 RPM, 128 CFM Max, 1/2 NPT Ports, 5/8" Dia. Output Shaft] |
| 40A-NEMA | 4.0 HP Air Motor; 56C NEMA Flange Mount |
| 50A-FOOT |
5.0 HP Air Motor; Foot Mount |
| 50A-NEMA |
5.0 HP Air Motor; 145TC NEMA Flange Mount |
Clamp Mounts
Attaches stirrer motor to the side of mixing container. Clear zinc plated for long life.
| MODEL | DESCRIPTION |
|---|---|
| DR-7 | C-Clamp Pail Mount; 3" Max Opening; 5/8" Mixer Mounting Rod; Zinc Plated; *Connects to powerhead via clamp block [both sold separately] * |
| DR-8/9 | Single C-Clamp Mount; 4" Max Opening; 3/4" Mixer Mounting Rod; Zinc Plated; *Connects to powerhead via clamp block [both sold separately] * |
| DR-10 | Dual C-Clamp Mount; 4" Max Opening; 3/4" Mixer Mounting Rod; Zinc Plated; *Connects to powerhead via clamp block [both sold separately] * |
*Clamp Blocks sold separately
Grounding Clamps
FM Approved Ground Clamp
| MODEL | SIZE | DESCRIPTION |
|---|---|---|
| GC/TA-3 | 1/8" Diameter with 3' long | Stainless Steel Cable; Cast aluminum hand clamp w/ opposing hardened stainless steel points for strong biting force; 1/4" lug opposite end |
Container Holders
Complete with L-4 Clamp Block
| MODEL | DESCRIPTION |
|---|---|
| CH-1-C | 1 Gallon Size, 15" long |
| CH-5-C | 5 Gallon Size, 33" long |
Air Hoses
Features crimped brass swivel fittings and heavy-duty reinforced, non-conductive hose. Contact us for custom lengths.
| MODEL | DESCRIPTION |
|---|---|
| AH-4 | 4’ Long 1/4” Dia. Hose with 1/8 NPT Male Fittings |
| AH-5 | 5’ Long 3/8” Dia. Hose with 1/4 NPT Male Fittings |
| AH-210 | 10’ Long 1/2” Dia. Hose with 1/2 NPT Male Fittings |
Repair Kits for Air Motors
Everything you need to give your air motors new life. Kit consists of bearings, gaskets, seals, and vanes (springs and pins if applicable).
| MODEL | DESCRIPTION |
|---|---|
| K200 | Repair Kit for 10A-HUB; Includes shaft seal, bearings, gasket, and shims |
| K202 | Repair Kit for 20A-HUB; Includes shaft seal, bearings, gaskets, and vanes |
| K205 | Repair Kit for 30A-HUB; Includes shaft seal, bearings, gaskets, vanes, pins, and vane springs |
| K206A | Repair Kit for 30A-NEMA; Includes shaft seal, bearings, gaskets, vanes, pins, and vane springs |
| K208 | Repair Kit for 40A-FOOT, 40A-FACE, and 40A-NEMA; Includes shaft seal, bearings, gaskets, vanes, pins, and vane springs |
| K210 | Repair Kit for 50A-FOOT; Includes shaft seal, bearings, gaskets, vanes, pins, and vane springs |
| K211 | Repair Kit for 50A-NEMA; Includes shaft seal, bearings, gaskets, vanes, pins, and vane springs |