Drum Mixers

Fawcett > Drum Mixers
Bung Mount Mixers
Lid Mount Mixers
Clamp Mount Mixers
Agitator Drum Mixers
Screenshot 2023-12-18 104357(1)-PhotoRoom (1)

BHM Series

Bung Mount Mixers

Bung Hole Mount (BHM) Series Mixers are designed for use on a closed (tight head) steel drum of low to medium-viscosity materials. The threaded mount quickly and easily screws into a 2” drum lid bung hole. Collapsible impellers fit through the 2” opening and expanded to 4” in diameter when in operation.

Features:

  • 2 NPT drum connection
  • Designed for 55 gallon drum (shaft length can be modified)
  • Quick mounting
  • All wetted parts are 304 Stainless Steel
  • Variable speed control valve
  • Noise dampening exhaust muffler

 

Request a Quote
Model HP Max RPM Max Air Requirements Air Inlet Viscosity Range Shaft Size Impellers
BHM - 2A1.03,00030 CFM1/4 NPTLow1/2” x 30”(1) 4” Folding
BHM - 3A1.73,00072 CFM1/4 NPTMedium Low1/2” x 30”(2) 4” Folding
BHM - 4A4.03,000128 CFM1/2 NPTMedium High1/2” x 30”(2) 4” Folding

*Ratings are at max motor pressure of 100psi. Motors should never be operated under a non-load / free spinning condition. Max RPM rating is for speeds under load.

PM/PMC Series Lid Mount Mixers

PM/PMC Series

Lid Mount Mixers

Fawcett's extra-powerful 3 and 5 hp direct drive air-operated mixers for drums and tanks are designed to effectively mix liquids without costly spills or splashing. Also available are versions for use with tote tanks and various
other tanks.

 Features:

  •  Direct drive air motor
  • Sold pre-mounted to drum lid or without drum lid for DIY mounting to your existing drum covers
  • MixedFLOW™ Impellers
  • All wetted parts in 304 stainless steel
  • Noise dampening exhaust muffler
  • Variable speed control valve

Upgrades & Options

  • Lube Free Air Motors
  • Mechanical Dial Tachometers
Request a Quote
Screenshot 2023-12-18 104357(1)-PhotoRoom (2)
Model HP Max RPM Max Air Consumption Air Inlet Lid Included Impellers Included Viscosity Shaft Lengths
PM - 2081.03,00030 CFM1/4 NPTNone(1) 4” HLow30" x 1/2"
PM - 208/241.03,00030 CFM1/4 NPTNone(2) 4“ HLow30" x 1/2"
PMC - 2081.03,00030 CFM1/4 NPTPlain Steel(1) 4” HLow30" x 1/2"
PMC - 208/241.03,00030 CFM1/4 NPTPlain Steel(2) 3” HLow30" x 1/2"
PMC - 208S1.03,00030 CFM1/4 NPTStainless Steel(1) 4” HLow30" x 1/2"
PM - 3081.73,00078 CFM1/4 NPTNone(1) 6” HMedium Low30" x 1/2"
PM - 308/251.73,00078 CFM1/4 NPTNone(2) 5” HMedium Low30" x 1/2"
PMC - 3081.73,00078 CFM1/4 NPTPlain Steel(1) 6” HMedium Low30" x 1/2"
PMC - 308/251.73,00078 CFM1/4 NPTPlain Steel(2) 5” HMedium Low30" x 1/2"
PMC - 308S1.73,00078 CFM1/4 NPTStainless Steel(1) 6” HMedium Low30" x 1/2"
PM - 4084.03,000128 CFM1/2 NPTNone(2) 6” HMedium30.5" x 5/8"
PMC - 408D4.03,000128 CFM1/2 NPTPlain Steel(2) 6” HMedium30.5" x 5/8"
PMC - 408D/S4.03,000128 CFM1/2 NPTStainless Steel(2) 6” HMedium30.5" x 5/8"
PM - 5085.02,500175 CFM1/2 NPTNone(1) 8” HMedium High30.5" x 3/4"
PMC - 508D5.02,500175 CFM1/2 NPTPlain Steel(1) 8” HMedium High30.5" x 3/4"
PMC - 508D/S5.02,500175 CFM1/2 NPTStainless Steel(2) 8” HMedium High30.5" x 3/4"

*Ratings are at max motor pressure of 100psi. Motors should never be operated under a no-load/free spinning condition. Max RPM rating is for speeds under load.

OD/OT Series Clamp Mount Mixers

OD/OT Series

Clamp Mount Mixers

Open Drum/Open Tank (OD/OT) Series Clamp Mount Mixers are designed for mixing in open top containers. They feature cast iron, corrosion resistant plated clamp assembly and clamp block allowing for versatile impeller positioning. Larger models incorporate a dual clamp system for extra support and stability.

Features:

  • 55 gal drums up to 300 gallon open tank
  • MixedFLOW™ Impeller/s
  • Heavy duty corrosion resistant clamp mounting
  • All wetted parts are 304 stainless steel
  • Variable speed control valve
  • Noise dampening exhaust muffler

Upgrades & Options

  • Lube Free Air Motors
  • Mechanical Dial Tachometers
  • Keyed or Keyless Chuck
Request a Quote
Model Container Description HP Max RPM Max Air Requirement Air Inlet Viscosity Range Blade Type Shaft Length
OD-20255 Gal1.03,00030 CFM1/4 NPTLow(1) 5” H34" x 1/2"
OD-20355 Gal1.73,00072 CFM1/4 NPTMedium Low(1) 5” H34" x 1/2"
OD-20455 Gal1.73,00072 CFM1/4 NPTMedium Low(2) 5” H34" x 1/2"
OD-20655 Gal1.73,00072 CFM1/4 NPTMedium Low(1) 6” H34" x 1/2"
OD-20855 Gal4.03,000128 CFM1/2 NPTMedium High(2) 6” H34" x 5/8"
OD-21555 Gal5.02,500175 CFM1/2 NPTHigh(1) 8” H34" x 3/4"
Model Container Description HP Max RPM Max Air Requirement Air Inlet Viscosity Range Blade Type Shaft Length
OT-210Up to 300 Gal4.03,000128 CFM1/2 NPTMedium High(2) 6” H40" x 5/8"
OT-215Up to 300 Gal5.02,500175 CFM1/2 NPTHigh(2) 8” H40" x 3/4"

OT mount mixers are able to be used on larger drums

*Ratings are at max motor pressure of 100psi. Motors should never be operated under a no-load/free spinning condition. Max RPM rating is for speeds underload.

ADM Series

Agitator Drum Mount Mixers

Agitator Drum Mixer (ADM) drive units thread onto the center bung of “Woodman Agitator” style in-drum agitator systems. May be used in open & tight head drums. These units have a square drive coupling that engages with the 7/16 square shaft of the in-drum agitator assembly. A locking nut allows for the unit to be tightened down once coupling is engaged.

MODEL ADM-2 ADM-3 ADM-4
BUNG MOUNT THREAD SIZE1.5 NPT1.5 NPT1.5 NPT
MOTOR NOMINAL HP1.01.74.0
MAX TORQUE26 LB-IN56 LB-IN115 LB-IN
SPEED AT MAX TORQUE350 RPM300 RPM300 RPM
MAX FREE SPEED3,000 RPM3,000 RPM3,000 RPM
TORQUE AT MAX SPEED19.5 LB-IN36 LB-IN84 LB-IN
AIR INLET SIZE1/4"1/4”1/2"
MAX AIR PRESSURE100 PSI100 PSI100 PSI
MAX AIR CONSUMPTION30 CFM78 CFM128 CFM
MOTOR PART NUMBER20A30A40A

  • ”Woodman Agitator” style drums and in-drum agitation blades sold separately.

  • Properly measure the ID of your bung threads and square drive shaft before ordering.

  • Unmounted motor with maximum air flow, once coupled to agitator drum the load will have impact. Do not operate unit without any fluid in drum.

ADM_1 copy

1 3/4 ID = 1 1/2 NPT

ADM-2 copy